HARDWOOD FLOOR REFINISHING HARRISON HOT SPRINGS, AGASSIZ & THE DISTRICT OF KENT
Sandover Floors has been sanding, refinishing and restoring hardwood since 1939. Our Fraser Valley team serves Harrison Hot Springs, Agassiz and the District of Kent. From lakefront homes and vacation properties in the village to farmhouses and family homes around Agassiz, we bring worn floors back to a smooth, durable finish. We also handle repairs, staining and new hardwood installation.
Hardwood Floor Refinishing for Lake Country Homes
Life at the south end of Harrison Lake is hard on hardwood. Sand and grit come in from the beach, damp air comes off the water, and winters here run colder and snowier than in most of the valley. Our crews come over from Chilliwack on the Rosedale–Agassiz Bridge to bring tired floors back across Harrison, Agassiz and the surrounding district. Our hardwood floor refinishing takes the floor back to bare wood with dust control sanding. We then apply low VOC finishes in the sheen and colour you choose, and the result is a floor that looks new and is ready for years of use.
Our Flooring Specialties
-
Fine sand works like sandpaper underfoot, wearing through the finish in entries and main walkways. We sand off the old, scratched topcoat and level out wear patterns. Then we apply a fresh, hard-wearing finish built for homes where people come and go all day.
For cottages and rentals, we can recommend a finish that stands up to guest traffic and is easy to recoat later. -
Before refinishing, we fix what’s underneath. That includes replacing water-damaged or cracked boards, tightening loose areas and filling gaps through our hardwood floor repair service.
For older floors, our hardwood floor restoration brings back original fir and oak while keeping the character that makes them worth saving. -
Refinishing is the best time to change the colour of your floors. Our staining service covers everything from light natural tones that suit lake and mountain views to warm browns and modern dark finishes.
We test stain samples on your own boards first, so you see the real result before we commit. -
When a floor can’t be saved, we supply and install solid, engineered and prefinished hardwood, with careful subfloor preparation for slabs, crawlspaces and older framing.
We also refinish or rebuild staircases with new treads and risers so they match your floors.
Harrison Hot Springs
Harrison Hot Springs is a lake village, and it has its own mix of homes: lakefront houses, strata units, cottages and vacation rentals, many of them busy from spring through fall. Floors here see beach sand, wet towels and wet footwear, and plenty of guests. Many owners book refinishing in the quieter months, before the busy season starts, so the floor is fresh and fully cured when visitors arrive. We work around your schedule, and for part-time owners we can coordinate access and updates while you’re away.
Agassiz
Agassiz pairs a small-town core with farmland running out in every direction. Older homes near the village centre often have original hardwood hidden under carpet or worn finishes, and we can usually sand and restore it. Newer family homes see hockey bags, muddy boots and dogs, which leave hallways and kitchens dull and scratched. A sand and refinish brings back an even surface, and a stain refresh can update the whole look of the home.
The District of Kent
Across the rest of the District of Kent, including Ruby Creek and the farm roads between the Fraser and the mountains, we work in farmhouses, acreages and rural properties. Floors in these homes deal with field dust, mudrooms that see heavy use, and dry heat from wood stoves in the colder months. We check for gapping, moisture damage and loose boards first, make the repairs, then refinish so your floors can handle rural life.
Wherever you are in Harrison, Agassiz or Kent, call our Fraser Valley line at 236-777-6965 to book a free on-site estimate. Our nearest location is in Chilliwack on Princess Avenue, a short drive across the river.
Why Choose Sandover Floors?
Refinishing Specialists Since 1939
More than 80 years of sanding and finishing hardwood means we know when a floor can be saved and how to get the most out of it.
Built for Lake and Mountain Weather
We plan around damp air, cold winters and beach grit, choosing finishes and repair methods that hold up to all three.
Flexible for Vacation and Rental Owners
Off-season scheduling and clear communication help keep your property’s downtime to a minimum.
Cleaner, Healthier Process
Dust control sanding and low VOC finishes mean less mess and less odour, whether it’s your full-time home or your getaway.
Common Floor Problems Around Harrison Lake
Sand scratches and worn traffic lanes: Beach grit wears through the topcoat fast. A full sand and refinish removes the scratches and resets the protection.
Water damage from wet gear and humidity: Swimsuits, towels and damp lake air can leave grey stains and lifted board edges. We replace boards that are too damaged to save before refinishing.
Winter gaps from cold and dry heat: Cold outflow winds and wood stove heat dry boards out in winter. We assess whether gaps are seasonal before recommending repairs.
Uneven sun fading: Large windows facing the lake or mountains can fade floors unevenly. Refinishing evens the colour back out.
Dated stain colours: Orange-toned oak and older finishes make a home feel dated. A refinish with a new stain gives the whole space a modern look.
Serving Harrison, Agassiz and the Fraser Valley since 1939
Sandover Floors provides hardwood floor refinishing, restoration, repair and installation across Metro Vancouver and the Fraser Valley. Our team covers Vancouver, Burnaby, Coquitlam, Mission, Abbotsford, Chilliwack, Agassiz and Harrison Hot Springs, using quality materials and low VOC finishes on every job.
Our Flooring Process That Keeps You Informed
Every Step of the Way
-

Speak to an expert
Call us or fill in our form to speak to our flooring experts.
-

Free consultation
Have our experts visit you to assess your flooring needs.
-

Get Your Free Quote
Once you have decided on your flooring requirements, we give you a free quote.
-

We Get Started
We get started on your flooring project!
Our
Projects
Frequently Asked Questions About Hardwood Floor Refinishing in Harrison Hot Springs
Do you offer hardwood floor refinishing in Harrison Hot Springs?
Yes. Our Fraser Valley team serves Harrison Hot Springs, Agassiz and the wider District of Kent, including Ruby Creek and rural properties across the area. Call 236-777-6965 to book a free on-site estimate.
When is the best time to refinish floors in a vacation home or rental?
Many owners book refinishing in the quieter months, before the busy season starts. That leaves enough time for the finish to cure fully before guests arrive. We work around your booking calendar and can coordinate access if you're not on site.
Can you remove scratches caused by beach sand?
Yes. Sand scratches sit in the finish and the top layer of the wood, so a full sand and refinish removes them. Afterward, good entry mats and regular sweeping go a long way toward protecting the new finish.
How do Harrison's cold winters affect hardwood floors?
Cold outflow winds and indoor heating, especially wood stoves, dry hardwood out over the winter. That can open gaps between boards. Most seasonal gaps close again in spring, and a humidifier helps through the dry months. We check whether gaps are seasonal or permanent before recommending any repair.
Can you restore the original hardwood in an older Agassiz home?
In many cases, yes. Older homes often have solid fir or oak that can be sanded and refinished again. We check the thickness and condition of the boards during your consultation, then recommend restoration or refinishing to keep the floor's character.
Can I change the colour of my floors when they're refinished?
Yes. Once the old finish is sanded off, the wood is ready for a new stain. We test samples on your own boards so you can see the actual colour before we finish the whole floor.
How long does hardwood floor refinishing take?
Most refinishing jobs take two to five days, depending on the size of the space, any repairs needed and the finish you choose. We confirm your timeline before work begins.
Ready for Beautiful New Floors? Let’s Get Started Today
Tell us about your project through our quick contact form or give us a call. One of our flooring experts will get back to you, answer your questions and book a free on-site consultation. We’ll look at your floors, walk you through your options and give you a clear, no-obligation quote. From the first call to the final coat, we keep your Mission BC flooring project simple and stress-free.
Metro Vancouver call 604-720-3671
Fraser Valley call 236-777-6965